Oriented Designs Mountain Bikes

Continuing Oriented Designs of Mountain Bikes.

Freeride (FR) mountain bikes are similar to All-Mountain bikes, but with less emphasis on weight and more on strength. Freeride bikes tend to have up ample suspension, typically have at least 6 inches (150 mm) of travel. The components are built from stronger, consequently heavier, materials. They can be ridden uphill, but are inefficient and their moderately slack head tube angles make them difficult to maneuver while angled up a hill or traveling at a low speed. They are effective on technical downhill trails. Frame angles are typically steeper than those found in downhill bikes. This enhances maneuverability over and around small objects. Freeride bikes typically range in weight from 30 to 45 pounds. Freeride trails are built using natural terrain features to create stunts such as dropoffs, also known as "hucks", narrow ladder bridges called "skinnies", as well as large ramps built to launch the rider into the air. The most durable freeride bikes are often too heavy and have too much suspension to be ridden uphill as comfortably as other less-sturdy models, although newer, more expensive bikes come with suspension specifically designed to make them easier to ride uphill. It is, however, quite common for freeriders to frequent lift accessed riding terrain, offered at ski resorts during the off season, or simply walk their bikes uphill, rather than riding them.

Downhill (DH) races are time trials events where riders ride courses separately, racing the clock. They can have technical sections like rockgardens as well as jumps and drops. Downhill Bikes typically have 7 or more inches (178 mm) of suspension travel. They are built strong while light. In the past few years, lighter downhill bikes have been getting below the 40lbs mark. Due to their typically large or high gears, long, plush travel and slack geometry angles, Downhill bikes are ideal only for riding down dedicated downhill trails and race courses. Downhill bikes have the most sag of Mountain Bikes to get ample traction to go fast over bumpy trails. Head Angles are often as slack as 64 degrees. At the ski resorts that have mountain biking in the off season, riders can get lots of runs in because of chair lifts. Shuttling up to the top of trails very common as most trails, away from ski resorts do not have lift access. When there is no car or truck access to shuttle, riders usually push and/or ride bikes to the top of the trails. Due to the high speed nature of downhill riding most bikes only have one chain ring in the front, a large bash guard and a chain guide, though many racers are now using chain guides without bash guards to drop weight.

Trials bikes are set up very specifically for the purpose of bicycle trials. Two varieties of trials bike exist, those with 26" wheels (referred to as 'stock') and those with 20" wheels (referred to as 'mod' - because historically they were modified BMX bikes). They typically have no suspension at all, though some still make use of some form of it. Competition rules require stock bikes to have multiple gears for competition, but most riders never use their shifters. Competition rules do not require mod bikes to have any gears. Many non-competitive riders run single-speed, choosing a fairly low-speed, high-torque gear. Most modern trials bikes have no seat at all, as the rider spends all of his time out of the saddle. These bikes are significantly lighter than almost all other mountain bikes, ranging from 15 to 25 pounds. This makes manoveuring the bike much easier.